5 Methods To Repair “Getting ready To Configure Home windows” 

Posted on

At instances, throughout boot, your PC takes a very long time to load with a message “Getting ready To Configure Home windows” on the display. This course of can take a couple of minutes to a number of hours to finish, which leaves you unable to make use of your system to carry out any duties for the length.

This normally occurs when Home windows tries to make modifications to your PC by putting in the brand new recordsdata and settings which had been downloaded throughout the newest replace.  Subsequently, uninstalling the replace(s) is the go-to resolution to repair it.

Moreover, defective program(s) or broken system recordsdata are additionally seemingly offenders. Let’s talk about the opposite problem-causing options for this challenge and their corresponding options via this text.

Easy methods to Repair Getting ready To Configure Home windows?

The very first thing you must do is wait. When your PC is rebooting with this message on the display, Home windows is attempting to resolve any points inside the system recordsdata or set up updates. Subsequently, be affected person and wait till this course of is full, and don’t flip off your system.

Nevertheless, if the configuration course of takes a really very long time i.e. greater than 3 hours to finish otherwise you encounter this example incessantly, there might be different points inflicting this error that are listed under.

Please notice that in case your pc will get caught throughout the configuration stage,  you should carry out a tough reset of your machine to restart the system.
  • For laptops, press and maintain the ability button for just a few seconds to reboot the machine.
  • For PCs, press and maintain the ability button for just a few seconds. If this doesn’t work, unplug the ability supply of your machine to show it off.

Carry out a Clear Boot

Clear Boot initiates your PC with the least variety of drivers and applications, basically solely those that are required by the system. Subsequently, in case your system is going through this error as a consequence of some defective applications throughout the start-up, clear booting ought to remedy it. Right here’s the way you do it:

  1. Press Home windows + R keys to open the Run dialog field.
  2. Sort msconfig within the field and press Enter.
  3. Choose the Providers tab within the System Configuration field.
  4. Examine the field beside the Conceal all Microsoft providers possibility.
  5. Click on on the Disable all possibility and hit
  6. Now go to the Startup tab and click on on Open Process Supervisor.
  7. Throughout the Process Supervisor, go to the Startup tab.
  8. Disable all apps which have their standing as Enabled.
  9. Shut the Process Supervisor and press OK earlier than you shut the System Configuration Field.system-config-ok-6882736
  10. Restart your machine.

Your machine will now begin in a clear boot setting. Examine whether or not the issue happens or not. If not, then a number of defective program(s) in your system is to be blamed.

Now, you should manually discover out which program is inflicting this challenge and both disable it throughout startup or take away it. After you load into Home windows in Clear boot, go to Providers on msconfig and allow one program that you simply had beforehand disabled. Now restart your machine.

Repeat this course of for every software individually till you find the defective one. Do the identical course of for startup apps within the Process Supervisor. As soon as you establish the defective software, both disable or uninstall it.

Uninstall updates

Generally, a problematic Home windows replace is in charge for preserving your PC in an infinite configure loop. After you carry out an replace, Home windows will set up the updates throughout the subsequent start-up section.

Therefore, as a consequence of points within the replace recordsdata or some glitches throughout set up, Home windows can take a very long time to finish the configuration and even get caught.

For such a case, uninstall the updates to rejuvenate your pc. Observe alongside to take action:

For Home windows 10,

  1. Press the Home windows + I keys to open the Settings window.
  2. Open Replace & Safety and go to Home windows Replace.
  3. Click on on the View replace historical past.
  4. Hit Uninstall updates on the prime of the window.
  5. A listing of all of the updates in keeping with their put in date is displayed.
  6. Proper-click on the replace and hit Uninstall.
  7. Click on Uninstall button within the pop-up to
  8. Restart your pc.

For Home windows 11,

  1. Press the Home windows + I key to open the Settings window.
  2. Open Home windows Replace > Replace historical past.
  3. Click on on Uninstall updates to open the record of current updates.
  4. Proper-click on the latest replace or the one that you simply assume is inflicting issues and choose Uninstall.
  5. Affirm your motion by clicking on the Sure button within the pop-up window.

Run SFC scan

As talked about earlier, corrupt and damaged system recordsdata are additionally one of many seemingly causes of this downside, for the reason that configuration is the stage when Home windows makes use of these recordsdata to make obligatory modifications to the system.

Subsequently, run the System File Checker (SFC) scan to scan and restore the damaged recordsdata. For this,

  1. Sort cmd within the search bar.
  2. Proper-click on Command Immediate and choose Run as administrator.cmd-rightclick-5575824
  3. Copy-paste or sort sfc /scannow and press Enter.sfc-scan-1-5090808
  4. After the method is full, Restart your pc.

Run the Examine Disk system device

The system recordsdata are saved by default within the C: drive inside your Exhausting drive. Points inside the arduous drive trigger file system errors resulting in the principle downside. So it’s greatest to take a look at disk errors and rectify them utilizing the chkdsk device. Observe the steps to run it:

  1. Sort cmd within the search bar.
  2. Proper-click on Command Immediate and click on on Run as administrator.
  3. Sort or copy-paste the code and press Enter key
    chkdsk C: /f /r /xchkdsk-tool-8048391
  4. A message with the Y/N possibility is displayed that mentions checking quantity throughout the subsequent restart. Press Y and Enter.
  5. Restart your system.

Now when the system restarts, the disk checking device scans and performs logical repairs to the required drive, fixing your downside.

Reset your PC

Resetting your PC will change all system settings to default and take away all updates. Subsequently, this will even take away the defective recordsdata or applications inflicting the “Getting ready to Configure Home windows” downside.

Reset removes all apps besides the default ones. You will have the choice to both delete or maintain your recordsdata after the reset. To reset your PC, observe these steps:

For Home windows 10,

  1. Press Home windows + I key to open the Settings.
  2. Go to Replace & Safety > Restoration.
  3. Click on on Get began button below Reset this PC.
  4. Choose whether or not you wish to delete or save your recordsdata.
  5. Click on on the Native reinstall possibility and choose Subsequent.local-reinstall-1-1463063
  6. Hit the Reset button on Able to reset this PC web page.

For Home windows 11,

  1. Press Home windows + I key to open the Settings.
  2. Below System, open Restoration.system-recovery-1-8007137
  3. Click on the Reset PC button below Restoration choices.rerset_button-7534122
  4. Select if you wish to maintain or take away your recordsdata.
  5. Choose Native reinstall > Subsequent.local-reinstall-1752055
  6. Hit the Reset button to start.

Your PC will restart after a short time and provoke the reset course of.

Observe: Use this as your final resort if not one of the above fixes work. Bear in mind to again up your essential recordsdata and notice this system settings.

Source link